2024 Aluminum Coil — AMS 4031 T3/T4 Aircraft-Grade Coil | HXM
Aerospace-grade 2xxx-series coil from a China AS9100D mill. 80+ tons T3/T4 in stock, slit to your width, EN 10204 3.1 with every lot.
📦 MOQ 200 kg / 1 t · ⏱️ Lead 10–20 days · 📜 EN 10204 3.1 · 💬 Quote in 24 h
B2B tailored pricing — not a catalog price. We quote per your exact alloy, temper, thickness, width, quantity & surface finish against current market. Typical detailed quote within 24 h; send a drawing/PDF for priority.
MOQ
200 kg / 1 t
Lead time
10–20 days
Cert
EN 10204 3.1
Quote
within 24 h
AS9100D
Aerospace quality system
EN 10204 3.1
MTC with every lot
ISO 9001
Quality management
AMS 4031 / ASTM B209
Spec compliance
- 80+ tons 2024-T3/T4 coil stock
- Slitting 20–2650 mm in-house
- FOB / CIF / DDP worldwide
- CHALCO / Hydro primary ingot
Available forms, sizes & tolerances (HXM stock)
All tolerances meet / exceed ASTM B209 & EN 485-2; thickness per EN 485-2, width per EN 755-4 / customer print. Tighter (−50% / −100%) on request. Stock tempers: O, T3, T4, T36, T6, T8, T861.
Coil · Slit coil · Strip · Cut-to-length sheet · Circle / disc · Embossed
| Dimension | Standard stock range | Tolerance (EN 485-2) | Note |
|---|---|---|---|
| Thickness | 0.1 – 12.0 mm | ±0.02 to ±0.10 mm | 0.1–0.5 tight on request |
| Width | 20 – 2650 mm | ±0.5 to ±2.0 mm | Slit to your width |
| Inner diameter | 75 / 150 / 300 / 505 mm | ±2 mm | 505 mm standard export |
| Coil OD | max 2000 mm | — | Eye-to-wall or eye-to-sky |
| Coil weight | 0.5 – 8.0 t | ±3% | 20 t max per order |
Quick Answer for procurement
2024 aluminum coil (UNS A92024 / EN AW-2024 / ISO AlCu4Mg1) is a heat-treatable 2xxx-series aerospace alloy with 3.8–4.9% Cu, 1.2–1.8% Mg, density 2.78 g/cm³, tensile 440–480 MPa (T3/T4). It is not fusion-weldable (hot-cracking risk) — use mechanical fastening. HXM stocks 80+ tons T3/T4, slit to 20–2650 mm, lead time 10–20 days, MOQ 200 kg stock / 1 t custom, quote in 24 h.
Why specify 2024 aluminum coil?
- High specific strength: 440–480 MPa tensile at 1/3 steel weight.
- Aircraft-skin pedigree — used for fuselage skin since the 1930s (Alclad 2024-T3).
- NOT fusion-weldable — use rivets / mechanical fastening / braze.
- Heat-treat dependent — strength from T3/T4/T6/T8 temper.
- Aerospace-documented — AMS 4031, EN 10204 3.1 MTC.
2024 is the global standard for aerospace sheet & coil — fuselage & wing skin, fuel tanks, structural panels and high-cycle fatigue components where strength-to-weight rules.
2024 aluminum coil specifications
Chemical composition (per ASTM B209, wt %)
| Element | Min | Max | Function |
|---|---|---|---|
| Cu (Copper) | 3.8 | 4.9 | Primary strengthener (Al₂Cu θ-phase) |
| Mg (Magnesium) | 1.2 | 1.8 | Strengthens, forms S-phase |
| Mn (Manganese) | 0.3 | 0.9 | Grain refinement, toughness |
| Fe (Iron) | — | 0.50 | Impurity (controls anisotropy) |
| Si (Silicon) | — | 0.50 | Impurity |
| Zn (Zinc) | — | 0.25 | Impurity |
| Ti (Titanium) | — | 0.15 | Grain refiner |
| Cr (Chromium) | — | 0.10 | Corrosion control |
| Others (each / total) | — | 0.05 / 0.15 | — |
| Al (Aluminum) | Balance | — | Base |
Mechanical properties by temper
| Temper | Tensile (MPa) | Yield 0.2% (MPa) | Elong. (%) | Hardness (HB) | Typical use |
|---|---|---|---|---|---|
| O (annealed) | ≤220 | ≤96 | 10–18 | ~55 | Forming stock, deep drawing |
| T3 | 440 | 290 | 12–18 | ~115 | Aircraft skin (Alclad) |
| T4 | 440 | 290 | 12–18 | ~115 | Natural aged — long stability |
| T36 | 460 | 325 | 8–12 | ~120 | Higher yield skin |
| T6 | 450 | 315 | 8–12 | ~125 | Higher yield, less ductile |
| T8 / T861 | 450 | 365 | 6–10 | ~135 | Cold-work + aged: max strength |
Physical & thermal properties
| Property | Value | Notes |
|---|---|---|
| Density | 2.78 g/cm³ | ~35% lighter than steel |
| Melting range | 502–638 °C | Solution treat: 488–499 °C |
| Electrical conductivity | 30–35% IACS (O) | Lower than 6061 — avoid busbar |
| Thermal conductivity | 121 W/m·K (O) | 190 W/m·K (T6) |
| Modulus of elasticity | 73.1 GPa | ~25% of steel stiffness |
| Coeff. thermal expansion | 23.2 × 10⁻⁶ /°C | 20–100 °C |
2024 vs 3003 vs 5052 vs 6061 — which coil do you need?
| Property | 2024 | 3003 | 5052 | 6061 |
|---|---|---|---|---|
| Strength (T6/T651, MPa) | 450 | 150 | 215 | 310 |
| Fatigue (10⁸, MPa) | 130 | 55 | 110 | 97 |
| Corrosion (salt spray, hrs) | ~96 | ~1500 | ~1200 | ~1000 |
| Weldability (fusion) | ❌ Poor | ✅ Good | ✅ Good | ✅ Good |
| Machinability | ✅ Good | ✅ Good | ⚠ Fair | ✅ Good |
| Best for | Aircraft skin, tanks | Cheap forming | Marine panels | Welded structures |
Where 2024 coil is used (aerospace & beyond)
Typical uses: aircraft fuselage & wing skin · fuel tanks & panels · heat-exchanger fins · truck & trailer body panels · signage & nameplates · packaging / foil laminate · lithographic sheet · automotive sport body parts. Alclad 2024-T3 remains the dominant civil-aircraft skin alloy for its strength-to-weight and fatigue resistance.
Buyer pain points — and how HXM solves each
Pain #1
Coil edge wave / camber — cheap slitting causes rejects in your press line.
HXM solution
In-house slitting with edge-trim control; flatness & camber per EN 485-2, inspected per lot.
Pain #2
Welding 2024 → cracking — assumed weldable like 3003/6061 → scrap.
HXM solution
We warn up-front: not fusion-weldable. Use fastening or switch alloy. Guide →
Pain #3
Temper swapped — T4 quoted, O shipped; caught after stamping.
HXM solution
In-house HB hardness report per lot; temper verified before shipment.
Pain #4
Long lead from western mills — 90+ days, +30% premium.
HXM solution
80+ tons 2024-T3/T4 coil stock; 10–20 day lead time, slit to your width.
Pain #5
No aerospace docs — need AS9100D, not just ISO 9001.
HXM solution
Full AS9100D + EN 10204 3.1 + spectro cert every lot. All coils →
Where HXM 2024 coil is already specified (representative cases)
Illustrative program summaries — replace with your real, approved case studies before publishing.
Aircraft skin sheet & slit coil
- 2024-T3 coil 1.2–3.0 mm × 1250 mm
- Qty 6.5 t · slit to width
- EN 10204 3.1 + spectro cert
- Lead 14 days · CIF Hamburg
✓ Zero rejection on 3 consecutive lots
Truck body & trailer panels
- 2024-T4 coil 2.0 mm × 1500 mm
- Qty 3.0 t · cut-to-length
- AS9100D flow-down docs
- Lead 12 days · FOB Shanghai
✓ Reordered 3× in 12 months
Anodized nameplate strip
- 2024-T3 strip 0.8 mm × 300 mm
- Qty 800 kg (below 1 t MOQ)
- Slit + protective film
- Lead 10 days · DDP Shenzhen
✓ Stock MOQ met, fast turn
2024 coil RFQ checklist — accurate quote in 24 hours
- Alloy & UNS — 2024 / UNS A92024 / EN AW-2024
- Temper — T3 / T4 / T36 / T6 / T8 / O
- Form — coil / slit coil / strip / cut-to-length / circle
- Thickness & width — mm (or inch); ID 75/150/300/505 mm
- Quantity — kg or tons (stock vs custom MOQ)
- Tolerance — standard or tight (−50% / −100%)
- Standard — ASTM B209 / EN 485-2 / AMS 4031
- Surface — mill finish / Alclad / anodized / film
- Destination & Incoterms — FOB / CIF / DDP + port
📧 Email mailto:[email protected] or WhatsApp +86 137 6190 6384. Drawing/spec PDF gets priority.
Frequently asked questions (2024 aluminum coil)
Is 2024 aluminum coil weldable?
No — not fusion-weldable (MIG/TIG hot-cracking risk). Use mechanical fastening, rivets or braze. For welded structures use 3003 or 6061.
T3 vs T4 — which temper for coil?
T3 is solution-heat-treated + cold-worked + naturally aged (classic Alclad skin); T4 is solution-treated + naturally aged without cold work. Both ~440 MPa; T3 gives slightly higher yield for panels.
What is the MOQ and lead time?
MOQ 200 kg stock / 1 t custom. Lead time 10–20 days ex-works from 80+ ton 2024-T3/T4 coil stock, slit to 20–2650 mm.
Do you provide material certification?
Yes — EN 10204 3.1 MTC + AS9100D mill cert + third-party spectro analysis every lot.
2024 vs 3003 vs 5052 coil — which to choose?
2024 for strength-critical aircraft skin (450 MPa, but not weldable); 3003 for cheap forming; 5052 for marine/corrosion; 6061 when you must weld. Pick by strength vs weldability.
Can you supply to AMS 4031?
Yes — 2024-T3/T4 coil produced/inspected to AMS 4031 / AMS-QQ-A-250/4, suitable for OEM sub-supply with full traceability.
Talk to a 2024-aluminum-coil specialist
From 200 kg of 0.8 mm T3 slit coil for prototyping to 8 t of 3.0 mm AMS 4031 for production — send your drawing, get a quote in 24 h.
Related products & guides
HXM Aluminum · AS9100D-certified aerospace aluminum coil supplier · 2024 Aluminum Coil