5052 Aluminum Wires

5052 Aluminum WireSpecifications

Diameter: 0.5mm-15mm

Length: Roll

Alloy Temper: HO,H12,H14,H16,H18,H19,H22,H24,H26,H28,F,H112,T651,T3,T451, T4,T6, ect.

Craft: Cutting, hemming, arc bending, welding, grinding, spraying, forming

Surface: Mill finish, no stains, without rough selvage, Anodizing

Certificate: ISO9001, CE, SGS, etc

Delivery Time: 7-20 days.

Here’s a concise table showing the equivalent grades and standards for 5052 aluminum wires:

Standard/Grade	Equivalent Grade	Key Features	Applications
5052 (US Standard)	5052	Excellent corrosion resistance, good strength, and workability	Marine, automotive, construction
EN AW-5052 (European Standard)	EN AW-5052	Same properties as 5052	Same as 5052
JIS A5052 (Japanese Standard)	JIS A5052	Same properties as 5052	Same as 5052
GB 5052 (Chinese Standard)	GB 5052	Same properties as 5052	Same as 5052

Here’s the chemical composition of the 5052 aluminum wire displayed in a horizontal table format using element symbols:

Element	Al	Mg	Cr	Mn	Cu	Si	Fe	Zn	Other Elements
Composition (%)	Balance	2.2 – 2.8	0.15 – 0.35	0.10 – 0.50	≤ 0.10	≤ 0.25	≤ 0.40	≤ 0.10	Each ≤ 0.05

Temper	Yield Strength (MPa)	Ultimate Tensile Strength (MPa)	Elongation (%)	Hardness (Brinell)
5052-O (Annealed)	65 – 115	130 – 185	25 – 40	30 – 50
5052-H32	210 – 250	260 – 300	12 – 20	60 – 80
5052-H34	230 – 260	270 – 310	10 – 18	65 – 85
5052-H36	240 – 270	280 – 320	8 – 16	70 – 90
5052-H38	250 – 280	290 – 330	6 – 14	75 – 95

For high-quality 5052 aluminum wires and professional assistance, contact HXM, your reliable supplier of aluminum products.

O (Annealed): This temper provides the highest ductility and lowest strength. It is used in applications requiring good formability and minimal strength.
H32: Offers a balance between strength and ductility. It is used in applications where moderate strength and good formability are required.
H34: Provides higher strength compared to H32 with slightly lower ductility. Suitable for applications requiring increased strength.
H36: Further increased strength and reduced ductility compared to H34. Used in applications needing high strength and some degree of formability.
H38: The highest strength temper, with reduced elongation. It is used in applications where maximum strength is critical.