Email: [email protected]

Tel/WhatsApp/Wechat: +86-13761906384

2011 Aluminum Strips

2011 Aluminum Strip Manufacturers

2011 Aluminium Strip Specifications

Standards : ASTM B209 / ASME SB209

Temper : O, F, H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H36, H38, H111, H112, H321, T3, T4, T5, T6, T7, T351, T451, T651, T851

Thickness: 0.15~10mm

Width: 10~500mm

Surface: Bright, polished, hairline, brush, sand blast, checkered, embossed, etching, etc

Finish: Mill, Customer specific finish

Delivery Time: 7-20 days.

2011 Aluminum Strip Data Sheet

Equivalent Specifications of Aluminum 2011 Strip

Standard/SpecificationEquivalent Specification
UNSUNS A92011
AA2011
ISOISO AlCu6BiPb
ENEN AW-2011
DINDIN AlCuBiPb
JISJIS A2011
BSBS 1B

Chemical Composition of  2011 Aluminum Strips

ElementPercentage (%)
Cu5.0 – 6.0
Bi0.2 – 0.6
Pb0.2 – 0.6
Fe≤ 0.7
Si≤ 0.4
Zn≤ 0.3
Others (each)≤ 0.05
Others (total)≤ 0.15
AlBalance

There are some differences in the chemical composition of aluminum products from different aluminum manufacturers, but they are all within a certain range. If you want to know more, please contact us directly!

Mechanical Properties of Aluminum 2011 by Temper:

PropertyT3T6T8
Tensile Strength379 MPa (55 ksi)427 MPa (62 ksi)483 MPa (70 ksi)
Yield Strength276 MPa (40 ksi)345 MPa (50 ksi)448 MPa (65 ksi)
Elongation10%8%5%
Brinell Hardness95120140

 

Physical Properties of 2011 Aluminum Strips

PropertyValue
Density2.85 g/cm³ (0.103 lb/in³)
Melting Point643°C (1190°F)
Thermal Conductivity138 W/m·K
Coefficient of Thermal Expansion23.2 µm/m·°C (13.0 µin/in·°F)
Electrical Conductivity38% IACS
Modulus of Elasticity71 GPa (10.3 Msi)
Specific Heat Capacity0.896 J/g·°C

Tempers of 2011 Aluminum Strips

TemperDescription
2011-OAnnealed (soft) temper. This temper offers maximum ductility and workability but with lower strength. Ideal for intricate forming and bending operations.
2011-T3Solution heat-treated, cold worked. This temper provides good strength with improved formability compared to harder tempers. Suitable for parts requiring moderate strength.
2011-T6Solution heat-treated, artificially aged. This temper gives higher strength than T3, with reduced formability. Common for precision machining applications.
2011-T8Solution heat-treated, cold worked, artificially aged. Provides the highest strength among the tempers, but with the lowest ductility. Used for high-stress applications.

Applications of 2011 Aluminum Strip Metal

  • Precision Components: Used in applications where high precision and tight tolerances are required, such as in electronics, aerospace, and automotive industries.

  • High-Speed Machining: Ideal for components produced by high-speed machining operations due to its excellent machinability.

  • Complex Geometries: Suitable for parts with complex shapes that require extensive machining.

2011 Aluminum Strip Packages

The following is our company’s standard aluminum strip export packaging. If the customer has any packaging requirements, our company can meet them.

FAQ

Aluminum 2011 strip is a specific form of Aluminum 2011 alloy, which is known for its excellent machinability. The strip form refers to long, narrow, and thin pieces of the material, typically produced in coils or flat lengths.

  • Machinability:

    • Aluminum 2011: Superior machinability, especially in high-speed machining applications. Excellent for producing complex parts with tight tolerances.

    • Aluminum 6061: Good machinability but not as high as in 2011. It is more versatile and is used where good mechanical properties and corrosion resistance are needed.

    • Steel (AISI 1018): Lower machinability compared to aluminum. Generally requires more tooling and longer machining times.

    • Brass (C36000): Excellent machinability, often used in applications where high precision is needed.

  • Strength and Hardness:

    • Aluminum 2011: Offers moderate strength and hardness. Suitable for applications where strength is important but not the primary requirement.

    • Aluminum 6061: Higher tensile and yield strength compared to 2011, making it more suitable for structural applications.

    • Steel (AISI 1018): Generally stronger and harder than aluminum alloys, making it suitable for structural and load-bearing applications.

    • Brass: Provides good strength and hardness, with a range of applications in mechanical and plumbing industries.

  • Thermal and Electrical Conductivity:

    • Aluminum 2011: Good thermal and electrical conductivity, making it suitable for heat dissipation and electrical applications.

    • Aluminum 6061: Slightly better thermal conductivity than 2011, also used in heat exchangers.

    • Steel: Poor thermal and electrical conductivity compared to aluminum.

    • Brass: Good thermal and electrical conductivity, used in applications requiring good conductivity and corrosion resistance.

  • Formability and Workability:

    • Aluminum 2011: Excellent formability and workability, particularly in the annealed (O) condition.

    • Aluminum 6061: Good formability, though not as high as 2011 in the annealed condition.

    • Steel: Less formable compared to aluminum, requires more effort for shaping and forming.

    • Brass: Very good formability, particularly in the annealed condition.

  • Applications:

    • Aluminum 2011: Ideal for precision machining, high-speed machining, and complex geometries. Common in electronic housings and intricate components.

    • Aluminum 6061: Used in structural applications, aerospace, automotive, and marine environments due to its balance of strength and corrosion resistance.

    • Steel (AISI 1018): Used in structural components, machinery, and automotive parts requiring higher strength and durability.

    • Brass: Used in fittings, plumbing, and electrical connectors due to its machinability and conductivity.

Yes, we can provide samples of 2011 aluminum strips for your testing. We can also provide samples of other materials. If you are not sure whether 2011 or other materials of aluminum strips meet your project requirements, you can contact us to get a sample.

Aluminum 2011 strip is a highly machinable material ideal for precision parts and high-speed machining applications. Its properties vary based on temper, affecting its strength, formability, and suitability for different applications. It balances good machinability with moderate strength and thermal conductivity but has lower corrosion resistance compared to some other aluminum alloys.

When using 2011 aluminum strips, carefully consider its machinability, mechanical properties, corrosion resistance, and suitability for a specific application. Make sure the selected temper meets strength and formability requirements, and take appropriate handling, manufacturing, and protective measures based on the intended use and environmental conditions. Balancing these considerations will help you optimize the performance and cost-effectiveness of your project.

If you are looking for a manufacturer and exporter of 2011 Aluminum Strip, I think we can be one of your Aluminum Strip suppliers! Here are some reasons why we think you can choose us:

Industry Time: We have been engaged in the metal industry for more than 10 years, with a professional manufacturing and export service team, advanced machinery and equipment, etc.

Competitive Product Prices: Due to our long history in this industry, we have long-term cooperation projects with many steel mills, so the quality and price of our products can be guaranteed. Our internal manufacturing efficiency has been improved, and we can produce more and better aluminum products in the same amount of time, thereby reducing our cost prices.

Excellent Customer Service: For first-time customers, we provide videos and on-site factory visits to increase customer trust. We accept payment methods such as TT, L/C, etc. The product warranty period is 5 years, etc.

Aluminum Strip Suppliers, Aluminum Strip Price, Aluminum Strip Manufacturers, Aluminum Strip For Sale

Why not give us a chance to serve your project? I believe we can become one of your best and most trusted aluminum strip suppliers!

Contact Us For Aluminum Steel Prices